Odds and ends and Home Depot still sucks

Some more small tasks while waiting for our laminate.

We shimmed the street side window.  It was originally 1/2" larger on one side, so the window screws didn't seat in wood.

Had to adjust the interior trim to fit also.

On the topic of shims, we added 1/4" to the bottom of our 5/8" table so we can use the metal edging we bought.

Finally, the insulation made the roof skin a little tight, so we clamped a straight edge and used a router to cut 1/4" off the top of the front and rear window openings.