Cheapskate temporary AC solution.

We usually don't use electrical hookups when camping, but will soon attend a trailer rally in the heat of summer that has hookups included, so we thought we would take advantage.

We didn't want to modify the trailer and already had a small window unit, so we bought this heater register box that fit perfectly over the AC outlet. 

https://www.homedepot.com/p/Master-Flow-12-in-x-2-1-4-in-to-6-in-90-Degree-Register-Box-90RB12X2-2X6/100151049

We bent out the edges into a flange and attached it with velcro tape so we could still use it as a window unit. 

We then attached a 6 inch dryer vent

https://www.amazon.com/gp/aw/d/B07BMFVKJ6?psc=1&ref=ppx_pop_mob_b_asin_title

 And connected it to the upper bunk window using a piece of birch and binder clip. 

 Final result is ghettotastic

Chuck Box

Got a new table saw and needed a project.  Was inspired by many examples I saw online but did not like how most required the stove to be moved to the top after opening, so tried a version where the top opens to reveal the stove and becomes side tables. 

Had a slight brain fart about the hinges so will need to add some small shims to the underside of the leaves to make the tables level, but am pretty happy with my $20 in cheap plywood. 

Chuck Box 2.0 is already knocking around in my head, better wood, better finishes, fixed top hinge design.

Space planning - Goal was, stove in top and lamps in box.

Cut List...Sorta

 

Coming together, but discovered a hinge "miscalculation" on the top

Handles

Pretty much exactly what I wanted.  Needed more than one can of shellac but only had one can.

Closed configuration.  The stand doesn't go all the way down because of the top hinges, but overall pretty happy.

Found some cool original brochures online

Not exactly our layout but very close. 

Labels

Recently decided the old gal needed a little touch up and wanted to buy some decals. Now, being about as cheap as they come, I wasn't going to pay $50 for a vinyl decal, so I picked some some sheets of 12"x12" permanent adhesive vinyl from Michael's. ($2 a sheet). 

I printed a logo found online and went to work with my exacto. 

Used some cling film to transfer. 

It's not amazing but passes the 50 yard and a squint test. I will do another for the front then use what's leftover to tweak the first prototype.

Edit:  Front went faster but went on sloppier.  Still good enough for a buck. 

We went camping!

Small Details

We didn't want to replace the gross sliders under the dinette seats, so we just added some Union Jack patterned grating from Home Depot to finish off the openings.

We also installed a few 12V accessories behind the dinette cushions.  There is another charger near the rear bed.

Finally, we actually reserved an evening at a nearby campsite for our maiden voyage next weekend.  The next few days will be dusting off the crusty camping gear.  Luckily Coleman stuff runs forever...a little oil soak for the old leather pump gaskets and all of this stuff fired up the first time after 10 years of sitting.

Paint Wrap Up

To finish our DIY paint job, we added a black stripe to match the truck.  We asked a lot of folks and most liked our "swoop" paint mockup, but Mama always has the final decision and she's a linear gal, so this is what we ended up with

Most folks don't paint their doors, but we thought it added a nice finished look.

2 weeks later, we added a second coat.  Unfortunately, when we removed the carport cover to look for thin coverage areas, we ended up with a bunch of ash from the Whittier Fire embedded in the paint.  Beats the bugs embedded last coat and it all wipes off pretty well with a cloth.